PDA

View Full Version : what to look at when buying a 85 250r


200x_Basket
06-19-2002, 11:07 AM
i am buying a 85 250r today and i need to know i should look out for? what are the problem areas and what is expensive to replace? i know the shifter and ros is stripped so that is one problem
thanks
chris
250sx
06-20-2002, 12:35 AM
look for damage to the case near the front sprocket which happens when the chain flies off.
250rAL
06-20-2002, 07:32 PM
Stand it on end and look for cracks on the underside of the swingarm near the pivot. Also check the frame between the radiators for cracks/breakage.
Caterpillar
06-22-2002, 04:41 PM
What about swing arm bearings? If they have not been done in a while, you will prob. have to drill out the pivot bolt........and that is NOT fun.........:mad: I just looked at a thundered 85/250R the other day. The guy wanted $1700.00Can for a $400.00Can bike......
Levi
06-22-2002, 10:43 PM
Seized pivot bolts are easy to get out. 4½" hand grinder and a 3/64" zip disc. Mind you, you have to remove the engine, but it will only take about 5 minutes to cut and remove the bolt. Much easier and safer than drilling.
200x_Basket
06-23-2002, 06:32 AM
what is the pivot bolt??
250sx
06-23-2002, 04:36 PM
It's what holds the swingarm to the rest of the trike.