PDA

View Full Version : Heavy Duty Shock or Springs



fatguy250sx
04-13-2004, 09:36 PM
Hello All,
I am looking for a suspension built for a 350lb rider that would bolt to a 250sx. Basically I am looking to raise the rear of the trike so I am not bottoming out when I hit bumps and jumps. Does anyone know where I could find such an animal and what I should expect to pay? Do I need a shock, or will a heavy duty spring work? I have no clue as to what I need here. I am looking to restore my trike completely from the frame up and set it up properly for a larger rider.

Thanks in advance.

Black Sheep
04-14-2004, 02:06 PM
as for lifting it that would be an impractical solution (too much money) but you can buy heavy duty springs and custom shocks that would solve your problem.

springs are around 75.00 and shocks range from 150.00-650.00

try Works Performance. they will be your best bet

fatguy250sx
04-14-2004, 08:18 PM
I just sent works an email. Thanks for the tip!

quadrider
04-18-2004, 11:25 PM
is there suck thign as a new spring or heavier spring for a 200x?

250sx
04-18-2004, 11:40 PM
you can get heavier/stiffer springs for just about every bike including the 200x. it will be easier to find one for yours than an SX

fatguy250sx
04-19-2004, 01:21 AM
I found a heavy duty spring for my sx at www.bikebandit.com they may carry others, I did not check.

quadrider
04-19-2004, 07:34 PM
whated you search under? oem or aftermarket?

Ride Red and on 3
04-19-2004, 10:50 PM
I have some stiffer Progressive springs I am going to put on my 85 250R this summer. I hope it helps since I am 6'2" and 215lbs.

Black Sheep
04-20-2004, 02:06 PM
Originally posted by Ride Red and on 3
I have some stiffer Progressive springs I am going to put on my 85 250R this summer. I hope it helps since I am 6'2" and 215lbs.

i would also consider going to a heavier oil weight. in my 86 i run the same springs with 15wt oil. i weigh 175lbs. you'll want to experiment with the height untill you find a good setting

Ride Red and on 3
04-20-2004, 02:53 PM
Originally posted by MR ATC


i would also consider going to a heavier oil weight. in my 86 i run the same springs with 15wt oil. i weigh 175lbs. you'll want to experiment with the height untill you find a good setting


Thanks for the tip:D

250sx
04-20-2004, 05:04 PM
yeah, i have damn near gear oil in mine. :D