185s carb jets

[commspec]

now using #95 jet in 185s carb. i would like smaller jets... where is a good source to buy. may help my fouled plug problems!!

[200x_Basket]

i get my jets at the local shop. how is your plug fouled? are you blowing any smoke? is it a dry black carbon dust or wet and grimy?

[commspec]

plugs are black with dry carbon not wet..does show trace of black smoke when you give it gas..i'll check local shops. thanks

[200x_Basket]

also check to ensure the choke is full open and that the float is set right. does it sputter or bog when you gas it?

[Fuzzy]

Have you tried moving the clip down a notch on your needle jet. To lean it out. I dont think jets are going to do in. A 95 is allready pretty small. It should be able to run like a 108 no problem. So if it is fouling with a 95 in there. It sure sounds like your needle or your idel jet are out of adjustment. And you can buy single jets at www.denniskirk.com