rob0781
07-17-2004, 02:35 PM
How do i take the cdi apart without all the springs and stuff fallin apart i wanna take it of so the timing chain is visible..
Now i have an oil leak on my engine ,the plate with the engine mounts that have the head bolts coming out,would this be my head gasket????If so that explains my idle problem......Now if i take the head off do i need to set the timing???i think i understand thisse thte flywheel to the "T" and turn the cam lobes up(i'm assuming witht he flywheel at T the piston will beTDC so does this sound right?Also for gasket i'm gonna use Dynatex dyna copper RTV silicone gasket maker good for temps of 700F(371C)....I won't be tacking this till after work in about 12 hours so this will give plenty time for people to give there input thanks in advance Rob...
Now i have an oil leak on my engine ,the plate with the engine mounts that have the head bolts coming out,would this be my head gasket????If so that explains my idle problem......Now if i take the head off do i need to set the timing???i think i understand thisse thte flywheel to the "T" and turn the cam lobes up(i'm assuming witht he flywheel at T the piston will beTDC so does this sound right?Also for gasket i'm gonna use Dynatex dyna copper RTV silicone gasket maker good for temps of 700F(371C)....I won't be tacking this till after work in about 12 hours so this will give plenty time for people to give there input thanks in advance Rob...