200s front wheel

[cman]

Is it possiable to put a aluminum front wheel on a 200s or 185s??:confused: i would like to keep the fat front tire, just replace the steel rim with a aluminum one. I dont remeber seeing this done.:shrug: cman.

[ATCnut]

It can be done. You just need a wheel with the correct offset and bolt pattern. Here is a chart with the info you need, and a ITP part number

http://www.3wheeler.org/vb/attachment.php?s=&postid=89773

[cman]

nothing as simple as the front and rear rims being interchangeable??

[ATCnut]

The part number shown for the front and rear rim are the same. When I had my 82 185s, I moved a tire and rim from the front to the back. So, yes the front and rear rims are interchangable. The stock 185s rims were split rims.

[cman]

Thanks for the info!!:thumbsup: I'll get started. Cman.

[my90rulz]

thanks for the chart ATCnut :headbang: :thumbsup:

[ATCnut]

The chart is in the tech tips forum too

[dads]

You may want to check with a tape the deepth of the dish. the 250sx front rim is 1/4 less dish than the back. The front works on the rear but it changes the tip piont.