Tecate Mods?

[Tecate250]

I have a damb near stock t4 and looked high and low for performance mods and there are next to none.
Any suggestions are welcome.

Tecate250

Ride it like you stole it:headbang:

[250sx]

are you running stock reeds? what size carb? what pipe? do you ride mud/water? if not you can ditch the stock airbox. you can shave the head for more compression. port the jug for better flow (not for the beginner!). how fast you wanna go? :D

[secluded]

i know a guy that used to have a t3, awsome fast machine. ported by DR sent the crank out to cali. to have it trued and welded and a whole bunch more. he was a real *speed demon* that was the fastest machine hes owned(4-6machines) at 110mph, on a trike :)

[Tecate250]

i want to go as fast as possible but looking for aftermarket parts is impossible.
I live in a rural area and there is no place to take your motor to get it zoned up.

[macanic]

First things first...
i got a tecate 3 and a 250r atc .....
and the tecate is bad ass.... asuming that were all going in a
straight line (dragracing).
tecate3 or 4 you can big bore 300 or 330 long rod (6mm stroker)
email me for the part # on the piston (macanic1974@aol.com)
get a keihn 39mm carb (www.sudco.com)
boysen power reeds
custom make a reed spacer half inch thick
mill head 0.15
rewind stator without head ligher coil
advanc timing
aftermarket pipe
run cooling aditive in radiator (water wetter - redline)
run gas 32:1 half 93 half 108 race
and glue your ass to the seat!!!!

makes approx 65 hp
im living proof...

TECATES RULE !!!!!

[Tecate250]

How much does the big bore cost for a tecate 4? And where can I get one at?. Ive been thinking of getting a 330 kit for it but do I have to customize my motor for it?