Front Sprocket Interchangibility???

[101987]

what front sprockets from different bikes will work on an 84 200x???

[Fuzzy]

You should be able to get all kinds of different ones at dennis kirk. Are you looking to go down in gearing for more power?.A 185s/200 11 tooth will fit on there. Or are you looking for more topend?. I think the 13 tooth 350x sprocket will also fit on there. But i am not absolutly sure about it.

[101987]

im looking for more top end, i was thinkin a 14th would be great. if i put a 15th on there i dont know if the 200x would push it, or if the chain would it the case???

[Fuzzy]

Wow dont get to carried away. One tooth can make a big difference. Jumping up three sizes might be a bit much. I think you could go with a 13 tooth without having to change the chain lenght. But any more then that you will either have to change your rear sprocket. Or add a link or two to the chain.

[101987]

Yeah,
your right fuzzy, ill try it with a 13 and see how she goes. BTW is that a 200s motor in a 200x frame on your RIDES???

[Fuzzy]

Yep it is a 200s bottom end. With a 200x top end on it. Or basicly a auto clutch 200x.

And when i switch mine back and forth between a 11 tooth and a 12 tooth. It makes about a 5mph difference in top end. But you can notice the difference in the low end. The 11 tooth will spin the tires easier. And get the revs up faster. Where the 12 tooth will wind out more between gears and give you more topend. So i think jumping up three gears would give you a heck of a lot more top end. But you might find that your wheel spinning is down to nothing. Unless you leave it in first and wind the heck out of it.