please help??

[350xguy]

i have a 350x and when you are installing your cam it says to align the T mark with the notch on the side cover but there are 2 T marks on the flywheel so which one do i use or does it matter.it should not get fire at both of these marks should it.

somebody please help?

[Fuzzy]

One is for TDC and the other is for fire(F) can you see any markings on either notch so you can tell witch is TDC and witch is F?.

[350xguy]

i know there is a t and f but there are 2 sets of them??

[dads]

Use a screw driver in the plug hole to find out which TDC is the one you use. only one will show up when piston is a top dead .
the timeing marks are proble for two different canecting rod lenghs . a short through and a long through. street & off road.

[Black Sheep]

there is actaully only 1 T mark on the fly wheel ther are 2 marks close together just before the mark that has a F then after the F is the T mark this is the one you want. i will try to take a picture later today and post it for you you will then see what i'm talking about

[350xguy]

i'm an idiot there is only one set of t marks on the flywheel i took off the side cover and i seen there is only one set. but it looks like to me that it would spark on the compression and the exhaust stroke???