Tecate Help

[ZSK]

I've aquired an 86 Tecate that's about 80% complete. A couple major components that are missing are the rear hubs, wheels and tires. My goal is to find hubs that fit the tecate but has a honda bolt pattern (4x110).

If anyone has some pictures of the engine mounts and the rear suspension linkage that would be great. I've rebuilt my 400ex front to back 3 times and can't figure out this rear end.:doh:

[86waterpumper]

:( I personally hope you never find any hubs that will do what you want haha keep the tecate bleeding green man :D There are durablue hubs right now in the classifieds on this board, and several on ebay always being parted out. AT any rate, here are some pics that might help you out.

http://instinctz.net/waters/Tecate/130065.jpg

http://instinctz.net/waters/Tecate/130077.jpg

http://instinctz.net/waters/Tecate/130082.jpg

[ZSK]

The pictures should help quite a bit thanks. For the hubs it's not that I don't want Kawasaki parts on the Tecate, everything I have here is a 4x110 bolt pattern. I have paddels mounted on wheels and extra sets, so if I could find honda hubs that fit then I won't have to buy wheels and tires.

[BigGreenMachine]

Those are my hubs for sale. I wouldn't mind some help figuring out the bolt pattern. The distance between studs measured from the center of the two studs is 4 inches. What bolt pattern is this? 4/100 like the 84 Tecate?

[jasonb32]

hello try microfiche---rivaracing/or bikebandit.com

[250sx]

BGM, you probably have the '84 pattern 4x4 hubs.