125m rear end help

[42F67N]

im trying to take the rear end apart on my 125m i removed the axle nuts and removed the cover that covers the brake drum i tryed to get the drum to slide off it wont budge,oilied it heated it hit it with a hammer nothing,i tryed hitting both side of the axle with a block of wood and a hammer to try to slide the axle out it wont budge is there something im missing here?

anyone here with a 125m thats taken the rear end apart that can help me.

also the its not the brake shoes hanging up

[jenndnn3]

On my 110 I can also take it from the sprocket side. I look on bikebandit at you setup and it also looks the same. I have had the brake setup seized as well on a 70 once, I took as well from sprocket side then once axle was off was able to beat (yeah I know bad choice of word) the drum system a little easier. Check and see if you have better chance at taking it from the sprocket side.
EDIT:
After looking at scheme a little closer, number 10 on the axle On bikebandit, makes it look like you need to definatly take it from that side. Look at both that and the drum system to see if you did not forget bolts. Considering how hard it is for you to get that subtranny, I would be real careful with this axle.

[42F67N]

I was wondering theres 4 bolts on the inside of the axle carrier 2 that go into where the brakes are and 2 that go into where the chain and sprocket are do i need them out to get the axle out?