PDA

View Full Version : 250SX dash lights....



Rivertoys
07-02-2006, 09:05 AM
My neutral and reverse indicators are not working on the SX. Any idea on where I should start tracing that out? I'll run through it logically, but just wanted to know if anyone had the scoop on a common problem or anything.

Thanks!
RTJas :D

chrisr200x
07-02-2006, 09:38 AM
Check the rubber boot and connections down on the lower part of the motor near the right footpeg. there is a little guard there.. behind that guard is the N and R switches. Clean them up good and this should get you back on line.

dads
07-02-2006, 11:43 PM
start with a test light, pull the bulbs and see if you have power in neutral.
Maybe bad bulbs.