PDA

View Full Version : easy 200x axle extension trick.



christian
09-01-2002, 11:06 PM
want to extend the wheel base for your 85 and older 200x?
find a set of 1986 200x hubs. its that simple.
they were quite a bit wider in '86.
you'd also be surprised at the amount of very wide quad hubs that will bolt right in.

Fuzzy
09-02-2002, 03:36 AM
Great tip John. I am going to have to look in to that.

ATCRYDER
09-03-2002, 02:04 PM
are they? Ive got some 85's on my 87 200x (it came with 200E) hubs...the only differance I knew of between the 200x hubs (83-85 vs. 8687) was the 86/87's have logner studs.

Rob

christian
09-03-2002, 10:02 PM
this was shown to me by a buddy had that has three 200x 's. i made a comment on his wide stance '84 and he pointed out the little trick to me. he took them off of his '86 that is supposed to be bone stock. he then proceeded to say that alot of the quad hondas have slightly wider hubs also. pretty easy trick i think.

Mr. Richard
09-03-2002, 11:16 PM
they might be 300ex hubs!!! they are really offset !!! check them out too...............:D :D :D :D

da_catt
09-03-2002, 11:21 PM
the 250x hubs are like 3/4" wider each side than the my 85 200x, and they fit