November Trike of the Month, Troll's ATC110

[Troll]

I got this for doing a little carb and tune-up work for a friend. Of course I could'nt let it remain stock. If it was close to being a nice trike, maybe a resto. But in this shape it will get some thought and working over.
http://i22.photobucket.com/albums/b327/Trikegodtroll/new110.jpg

http://www.3wheeler.org/vb/attachment.php?attachmentid=8019&d=1121176137




I had a old set of 85R fenders, so I used them for a template to fit and fab brackets.
Then got started on a seat.
http://i22.photobucket.com/albums/b327/Trikegodtroll/110mock2.jpg




I also had a set of tweeked 250sx forks. Had to cut and modify the steering stem. Still need to make a steering stop.
http://i22.photobucket.com/albums/b327/Trikegodtroll/110mock.jpg



Ended up using a airR front fender. Just adapted and set to clearance. Also polished the tubes and tripples. Then just playing around with headlight ideas.
Thanks to "dads" for the front brake parts. Funny how the 110 didnt have front brakes.
http://i22.photobucket.com/albums/b327/Trikegodtroll/1107.jpg




"dads' also got me a sx front wheel. I narrowed it two inches and the front is now a 20" narrow tire.
http://i22.photobucket.com/albums/b327/Trikegodtroll/1103.jpg




Got some wide off-set four bolt rear wheels. There 9's. Then fabbed a little bit.
http://i22.photobucket.com/albums/b327/Trikegodtroll/1104.jpg




Always liked drag style bars. So I bent up a set and whittled the ends. Got a newer type kill switch and went with a twister. Then made a "ATC" emblem.
http://i22.photobucket.com/albums/b327/Trikegodtroll/1102.jpg



Enough for now. Hi-wheelies..................................Troll:thumbsup:

[bansheeboy]

dude, why'd you lose the towlmaster front? that thing would have handled like mad! good work boss, i sure wish i had the ambiton some of you guys have...

[mywifeknowseverythin]

Great Job so Far Troll....Are you Shooting for Having it Finished Before the next Rampage????

[wild200x]

Troy, i cant wait to see it finnished! you never fail to impress.

[Ward223]

Dude, you gotta let me know how you narrowed the front rim!?!

[Troll]

Dude, you gotta let me know how you narrowed the front rim!?!

Basically, I Just cut a inch off each side. Set up a jig on the welding table. Then used a plasma cutter. Then mig welded after truing and taking.
I wanted a narrow rim with the sx forks, axle and hub. So it seemed like I was limited on wheel options with the off-set and bolt pattern. Then tire avalibility was fair. 20's on all three seem like a god change from the 22" balloons.
Good luck on yours.............................:thumbsup:

[Troll]

Got the tank done yesterday................:thumbsup:





http://i22.photobucket.com/albums/b327/Trikegodtroll/19091-1.jpg

[Troll]

Great Job so Far Troll....A
re you Shooting for Having it Finished Before the next Rampage????



Its now a possibility. Three Rampages and three different trikes so far. I really hope to bring this one this year.............:D

[Gdkarma]

:headbang: :headbang: :headbang: Lookin' GOOD fellow Triker!:headbang: :headbang: :headbang:

You do some magic to the motor? Surely you couldn't resist doing a bit of polishing!

[Rex Karz]

Love the paint job :headbang: :headbang:

[Troll]

Well, we finally got some better weather. So The atc110 project got some attention.
Got the twist throttle done, the front fender got mounted and received some bling.
Seat is done, temporally mounted 20" rear tires and got it down on all three. The 300ex hubs and offset wheels make it nice and wide. Plus its longer and lower. Did a bunch of misc things like O.H. the pull start assy, finished the mounting for the tilting rear R fender, ect....








http://i22.photobucket.com/albums/b327/Trikegodtroll/atc-3.jpg

[225DX DUDE]

Wow looking good troll!!!!!!

This is looking saweeet.:hail:

[X053]

VERY NICE!! :headbang:
That will be one trick 110. Is it going to run on trick 110?? :chuckle:

[Troll]

Thanks guys, its been along time since its had any progress. Half the battle was finding the stuff strung out with the other projects........lol
I'm sort of trying to finish it from the front toward the rear. Still a bunch to go. Getting old is a bitch................hahaa
Got to fear the 110cc power................... :thumbsup:

[Gdkarma]

:headbang: :headbang: :headbang: Lookin' like another HOT project from the legend Troll!:headbang: :headbang: :headbang:

[Troll]

Well, she's basically done. I rode it around a bit. Its been a long time......lol

Will get some pics asap.............................Thanks:thumbsup:















..........................................http://i22.photobucket.com/albums/b327/Trikegodtroll/110_animated.gif...............................















.

[225]

YOU FRIKIN TEASE.:nono:

[Troll]

http://i22.photobucket.com/albums/b327/Trikegodtroll/1-110.jpg








http://i22.photobucket.com/albums/b327/Trikegodtroll/3-110.jpg











http://i22.photobucket.com/albums/b327/Trikegodtroll/2-110.jpg









http://i22.photobucket.com/albums/b327/Trikegodtroll/36017.jpg






~Narrowed front rim two inches.
~Went with a 20" front tire.
~SX forks and front brakes.
~84r front fender
~Polished aluminum flamed insert
~Twisted octagon drag bars
~Twist throttle
~Relocated tank rearward and lower
~Stainless wire wrapped rubberized pegs
~Tilting 85r rear fender
~Cut-out flames with polished aluminum background
~Solo seat
~Maltese cross rear wheels
~20" tamers
~300ex rear hubs




It took around two and a half years to complete. Then around $300 total investment. Thanks............................. :thumbsup:





























Thanks to FlyingW and dads for parts!

[Gdkarma]

:hail: :hail: :hail: :hail: :hail: :hail: :hail: :hail:

That is TOO AWESOME dude! I like the unique look...................I have so much to learn from the GREAT ones.

:headbang: :headbang: :headbang: :headbang: :headbang: :headbang:

[225]

$300,2 and a half years.Boy I bet your happy it's done.lol

Looks sweet.

What did you do to the motor?

[360X]

Nice job on the 110 Bud.....:headbang: .....:thumbsup:

[X053]

:hail: :hail: :headbang: :headbang: 1 Sick!!! 110 :headbang: :headbang: :hail: :hail:

[RacerRichie]

Nice job on that trike dude...

[3wheelergod]

Its the nicest 110 I have EVER seen!! Nice Job Troll man!!!!!!!!

[dunerash]

WOW Troll that thing is sweet:headbang:

[johnnygun]

you gotta tell me more about "tilting" R rear plastic?

being able to adapt other plastic to some of the ignored (by maier) dinosaurs would be a great option.

looks way sweet. congrats!:thumbsup:

[Troll]

you gotta tell me more about "tilting" R rear plastic?

being able to adapt other plastic to some of the ignored (by maier) dinosaurs would be a great option.

looks way sweet. congrats!:thumbsup:




Thanks for your reply. In the long run, I'm not sure its worth the effort. I have around 30 hrs in the rear fender...............complete.
Fitting is somewhat straight forward. I used the atc110 hardware. Just modifided them alot. I can get detailed pics if you want. Let me know bro.
Heres a few pics .....................................:saywhat:
http://i22.photobucket.com/albums/b327/Trikegodtroll/35019.jpg


http://i22.photobucket.com/albums/b327/Trikegodtroll/35020.jpg


http://i22.photobucket.com/albums/b327/Trikegodtroll/35021.jpg

[johnnygun]

man that is one sweet a@@ bike!

pics are not needed, thanks. not so interested in tilt as just the fact that other bike fenders can be adapted...it is just a matter of hhardware relocation and hill billy engineering to get the angles right??

[225DX DUDE]

:hail:


Thats is the sickest 110 around!!!!

What does it say on the rear fender behind the seat?

[Troll]

What does it say on the rear fender behind the seat?


"All Terrain Cycle" ............................. :thumbsup:
http://i22.photobucket.com/albums/b327/Trikegodtroll/Atc.jpg

[BigTBones]

Looks good as always! Ive always loved your work Troll! Keep it up man!

[Tartanmack]

:hail: :hail: :hail: Excellent job mate first every post on this forum as I’m just starting out in the world of three wheelers (got two semi basket case 110s) but your build has given me great inspiration as to what can be done with these little beauties
Well done.:hail: :hail: :hail: :headbang: :D

[ADW3]

Welcome aboard Tartanmack! :thumbsup:

Oh, and Troll that is ANOTHER fantastic creation! :headbang:

[LonesomeTriZ]

I have never seen a 110 that looks that fast.

[FlyingW]

Bump for date..