My neverending story

[mymint87]

well, after I scored on it and ripped the stroker outta it all I was left with was a shell
http://i42.photobucket.com/albums/e341/mymint87/111.jpg
Old School boots on the axles...wanna do it up again like that on this build
http://i42.photobucket.com/albums/e341/mymint87/110.jpg

Ever seen a "FLUNK" turned loose with a couple rattle cans of paint?:loser:

http://i42.photobucket.com/albums/e341/mymint87/IMG_3594.jpg
I'm sick of the "FATTY"...It's gotta go
http://i42.photobucket.com/albums/e341/mymint87/IMG_3596.jpg
Penile extensions looking GREAT
http://i42.photobucket.com/albums/e341/mymint87/IMG_3597.jpg

so now this is where I'm at...and it served it purpose, bumped around in the dunes for a bit...here I am at Gordons Well waiting for a :bitchfigh loser:bitchfigh to line up with me

http://i42.photobucket.com/albums/e341/mymint87/1111.jpg

I need a longer rear shock, and a little softer at that....and I need a repaint.. BAD:cry: ...you can even see the stipple marks on the tank from when I roll applied the finish:doh:

I'll keep you up to date on this build...but don't hold your breath...:chuckle: might take a while ....

but then again....:yup: might not:yup: ....keep checking back





oh ya...ALL INPUT NEEDED:iluvu:

[mymint87]

HEY...BTW...thanks for the TONS of input


well the rear shot still has a hoseclamp around an A frame brake cable holder that i forgot to remove,,,,other than that its all there...(including the penile extension):lala:
http://i42.photobucket.com/albums/e341/mymint87/lightened.jpg
wasn't that hard finding a fiftenn inch shock...picked it up for 10 bucks:thumbsup:
http://i42.photobucket.com/albums/e341/mymint87/IMG_3793.jpg
might be an aquired taste as to how the tanks sits...but thats how they made em:D
http://i42.photobucket.com/albums/e341/mymint87/IMG_3794.jpg
I think its time for a full paint job now:rolleyes:
http://i42.photobucket.com/albums/e341/mymint87/IMG_3800.jpg
I wanna get a 250R front white fender for it.... little "Thumpy" looks like a mini Nicholson:cool:
http://i42.photobucket.com/albums/e341/mymint87/IMG_3796.jpg

HOP ON DUDES...Take it for a spin....... http://i42.photobucket.com/albums/e341/mymint87/IMG_3799.jpg

I can no way compete with 90% of you guys building trikes...You guys are awesome:headbang: ...this is about all I can do

BTW, stickers are too big but I temperaroy stuck em there to look picture a white fender too:yup:
http://i42.photobucket.com/albums/e341/mymint87/IMG_3802.jpg

BTW thanks again for all your input on this...I really appreciate it:hail:

[firefirefire90]

That front end from the 250R you scrapped apart for Allan?

[mymint87]

hell no...I flopped on that deal....I had a pristine pro vector lying around so i grabbed some silicone and slapped it on the split rim....

freakin front tire is A HEAVY SOB

[chrisr200x]

I think a couch uphoustry seat cover like 200xman has here:

http://www.3wheelerworldforums.com/showthread.php?t=61362 would look great on your ride. Definitly old school! ;)

[Mr. Richard]

HMMM, IS THIS A NEW PROJECT? FOR SOME REASON I HAVE NOT SEEN THIS THREAD BEFORE?????

so we are 110 pimpin now? i know where there are several frames like that,, just hardtails though,,,, i don't know if i could ride that big of a machine when was that picture at gordons taken? were you waiting for me? :D

[wild200x]

you make some radical sh!t man!

[mymint87]

I think a couch uphoustry seat cover like 200xman has here:
would look great on your ride. Definitly old school! ;)

totally!!! and even throw down some matching calve pads on the fenders

looks great ...great idea

[mymint87]

HMMM, IS THIS A NEW PROJECT? FOR SOME REASON I HAVE NOT SEEN THIS THREAD BEFORE?????

so we are 110 pimpin now? i know where there are several frames like that,, just hardtails though,,,, i don't know if i could ride that big of a machine when was that picture at gordons taken? were you waiting for me? :D

it's still small enough to have fun on....won't be allowed to compete with it at the Tres Regatta, but Im bringing it anyway (along with my stocker 70)


I've had many threads on this trike, I'm trying to polish it up a little cause its so darn fun to take to the drags.....:postwhore

that pic was from a couple years ago:thumbsup: .....
you know...when you weren't around and I was "King O Kamp"...:salute: :cry: AHHHH the good ol days:cry:

[3razors]

[BTW thanks again for all your input on this...I really appreciate it:hail:[/QUOTE]

I was actually speechless at the sight of it:headbang: ..No seriously, I didnt even know we had this section of the forum. That should be a fun old school camp stomper. I haven't seen fork boots on the axles since the early 90's. So is it a 110cc motor? Its cool seeing the buildup of trikes on here.

[mymint87]

you make some radical sh!t man!

didn't make a thing duner...just spun off with a couple rattle cans

[mymint87]

I haven't seen fork boots on the axles since the early 90's. So is it a 110cc motor? .

ya...after a short talk with Tom...he said he would disown me if i put the boots back on the axles...he never did it...he said girls usta do it alot...and he said they're Ghey

the motor a slight bore..if I remember right its a 118?

my buddies been yanking me on a alky stroker...he wants 5 bills and it needs a stator...but he has another carb for it if I want to convert it to high octane.. so alky stroker polished with 2 carbs no stator 5 bills...hmmmmmm

dont know if I'll get it or not...still on the fence about it...and if I do get it..then my choice is to put it this trike...or slam it in a 70 to punk KASEY's ARSE

PUNKING HIS BUTT sounds soooooooooo FRESH:thumbsup:

[jenndnn3]

I sold a bandito couple years back that Blazer did up! I really like the suspended 110...

The white looks good!

[ridetrikes250R]

my mint if u get a alky stroker 110 motor i will dis own u,.... u can keep your 10% powergain lol cause richard will know his bike will always run and start when kicked... alky is crappy on R's and harder then hell to tune in... imagen on a 13mm carb with a 110 stroker motor lol 8 horses... or 9 horses.. lol

[mymint87]

I sold a bandito couple years back that Blazer did up! I really like the suspended 110...

The white looks good!

thanks jenndnn3...it real fun and a head turner too...

[mymint87]

my mint if u get a alky stroker 110 motor i will dis own u,.... u can keep your 10% powergain lol cause richard will know his bike will always run and start when kicked... alky is crappy on R's and harder then hell to tune in... imagen on a 13mm carb with a 110 stroker motor lol 8 horses... or 9 horses.. lol

actually the stroker has a bigger carb and a manual clutch....

dude guarantees that it pops like a harley, he said just throw down a little bean oil in the tank to keep the carb from freezing over and watch the peoples reaction to the exhaust fumes....LOL

[mymint87]

well the long shock was just too soft so I went down the the salvage yard again........... they have metal trash cans full of shocks

so Im transferring shocks from can to can...spent about an hour...and it seemed every freaking shock I brought up was Something special to the salvage yard owner...even if the darn thing was blown he still wanted a couple jacksons for it...I finally got frustrated and left...went home and loosened the 200x shock with my new spanner wrench and slapped it back on....then a friend of mine called me and told me he had a 16 inch monoshock for a full floater RM he'd give me...said it would work perfect...so i'll pick it up tomorrow.....


ill get some new pics of ithe 110 with the RM shock and some pics of the alky engine are coming soon

[Mr. Richard]

lol !!! dude i admire your new found drive ,,,, i can't wait till the season starts!! i have alot to do to get ready but i will be ready!!! we will have as much fun around camp as the dunes too!!!!:headbang:

[mymint87]

NEW PICS......RM shock installed

http://i42.photobucket.com/albums/e341/mymint87/IMG_4005.jpg
http://i42.photobucket.com/albums/e341/mymint87/did.jpg
http://i42.photobucket.com/albums/e341/mymint87/didd.jpg
http://i42.photobucket.com/albums/e341/mymint87/IMG_4008.jpg

[ridetrikes250R]

... my R is in trouble....................

front forks....4 inches of travel
rear suspension 12 inches lol

looks nice tho!

[Gdkarma]

Dayum, there's not much to those, is there? Why you got the front forks so far up into the triples?

Interesting, I don't recall this thread before, and somehow missed it.:doh:

[mymint87]

front forks....4 inches of travel
rear suspension 12 inches lol


LMAO:2finger: :2finger: ....what do you expect for a flunk:doh:

[mymint87]

Why you got the front forks so far up into the triples?


I want it to sit level as best as it can

[mymint87]

.
front forks....4 inches of travel
rear suspension 12 inches lol


actually the rear brake cable holder mounted on the swinger comes up and hits the brace for the safety flag, the previous 200x shock was much lower giving only about 2 in of travel in the rear, I had to stiffen it to keep from bottoming out, it almost road like a hard tail....this new shock is taller and way softer giving me about 4 inches in the rear WITHOUT bottoming out

If the previous owner hadn't welded the flag mount like he did, it wouldn't have been an issue

[mymint87]

I gotta bondo and paint my stuff

http://i42.photobucket.com/albums/e341/mymint87/IMG_4009.jpg

[mymint87]

posted a vid to see the suspension in action

http://i240.photobucket.com/albums/ff61/dunetwist/th_MVI_4262.jpg (http://s240.photobucket.com/albums/ff61/dunetwist/?action=view&current=MVI_4262.flv)

[firefirefire90]

that was such an awkward movie



so who was kanks on the 110?

[mymint87]

some flunk....why do you ask?

[seadoo350X]

posted a vid to see the suspension in action

http://i240.photobucket.com/albums/ff61/dunetwist/th_MVI_4262.jpg (http://s240.photobucket.com/albums/ff61/dunetwist/?action=view&current=MVI_4262.flv)

It's like watching some kind of weird trike porn.:nono:

[mymint87]

It's like watching some kind of weird trike porn.:nono:

LOL....:lmao: :lmao: ...how'd I miss this post?....too funny seadoo350X:lmao:

[mymint87]

got some new to me. paperthin rear glass with custom paint and matching tank..gunna do a flip and toss em on Thumpy

my camera photog skillz wasn't up to par today but on the other side (blanked out by sun's reflection) in the same font the rear reads.........SUICIDE.............

Making it read across the back of the glass "SUICIDE MACHINE".............


might be using the Dick Cepek paddles for "the Nick" too....

[225]

Sick little thumper!!!!!

[250sx]

need to put those boots on the axle. :D

[motoman12]

this frame now has a new owner and will ride once again befor to long down here in TN