PDA

View Full Version : List of shared parts 200x & 350x

Vegas250RR
10-13-2007, 09:55 PM
I searched for a thread about this but to no avail. (maybe wrong keywords)

but it would be nice to have a running list of all items that fit either bike... heres what I have found for the 200x in the threads that I have viewed... I AM SURE THREE HAS TO BE MORE!... Parts are starting to become scarce, so lets pool our knowledge and survive!:headbang:
200X

1) Rear Caliper
a. 2006 CR80
B. 1987-2007 KX80
2) Front Caliper
a. 2000 KX80
3) Front Master Cylinder
a. 2002 CR80
Misc parts for different bikes as posted below, I will try to keep up with the list as best I can and again THANKS FOR ALL INPUT!!!:headbang:
83-85 200x and 350x grabbar same
4) Hubs
400ex 300ex 450R 0r 250ex
86/87 200x,350x, and trx250ex air filter same

bearings, there are alot of interchangeables. Dads has better info on this.

tecate petcock 84/85 = bayou 93-4

Front brakes on the 83-85 200x are the same as the 83-84 atc250r i believe

Steeting stem bearings
honda
all the same bearing kit
70, 90, 110, 125m, 185, 200e, 200es, 200m, 200s

all same bearing kit
:Honda - ATC200X 1983
Honda - ATC200X 1984-87
Honda - ATC250ES Big Red 1985-87
Honda - ATC250R 1981-82
Honda - ATC250SX 1985-87
Honda - ATC350X 1985

Valve Guides:
Honda - ATC185S 1981-83
Honda - ATC200 1981-83
Honda - ATC200E Big Red 1982
Honda - ATC200E Big Red 1983
Honda - ATC200ES Big Red 1984
Honda - ATC200M 1984-85
Honda - ATC200S 1984-86
Honda - ATC200X 1983-87

250R Brake Rotor( rear):

Honda - ATC250R 1985-86
Honda - TRX250R FourTrax 1988-89


250R Stator:

Honda - ATC250R 1985
Honda - ATC250R 1986
Honda - TRX250R FourTrax 1986-89


250sx trigger coil:


Honda - TRX250 Recon 1998-01
Honda - TRX250EX Sportrax 2001-05
Honda - TRX250TE Recon ES 2002-05
Honda - TRX250TM Recon 2002-05
Honda - TRX250X FourTrax 1987-88
Honda - TRX250X FourTrax 1991-92
Honda - TRX300 FourTrax 1988-95
Honda - TRX300EX FourTrax 1993-95
Honda - TRX300EX Sportrax 2001-05
Honda - TRX300FW FourTrax 4x4 1988
Honda - TRX300FW FourTrax 4x4 1990-95
Honda - TRX350 FourTrax 4x4 1986-87
Honda - TRX350D FourTrax Foreman 4x4 1987-89
Honda - TRX350TE Rancher ES 2000-05
Honda - TRX400FW Foreman 4x4 1995-01
Honda - TRX450ES Foreman ES 4x4 1998-01
Honda - TRX450S Foreman S 4x4 1998-01
Honda - TRX500FA Foreman Rubicon 4x4 2001-05
Honda - TRX500FGA Foreman Rubicon 4x4 GPScape 2004-05
Honda - TRX650FA Rincon 4x4 2003-05
Honda - TRX650FGA Rincon 4x4 GPScape 2004-05

Brake Caliper kit: its an assumption that this is all the same caliper... NOT A FACT (CHECK YOUR STUFF)

Honda - ATC200X 1986-87
Honda - ATC250R 1985-86
Honda - ATC350X 1985-86
Honda - CBR600F2/F3 1991-98
Honda - CMX250C Rebel 1985-87
Honda - CMX250C Rebel 1996-97
Honda - CMX250C Rebel 1999-01
Honda - CMX250CD Rebel Ltd 1986
Honda - CMX450C Rebel 1986-87
Honda - GB500 1989-90
Honda - GL1200 Gold Wing 1984
Honda - GL1200A Gold Wing Aspencade 1984-87
Honda - GL1200I Gold Wing Interstate 1984-87
Honda - NT650 Hawk GT 1988-91
Honda - ST1100 1991-00
Honda - ST1100A 1992-00
Honda - TRX200 1984
Honda - TRX200 FourTrax 1990-91
Honda - TRX200D FourTrax Type II 1991-95
Honda - TRX200SX FourTrax 1986-88
Honda - TRX250 FourTrax 1985-86
Honda - TRX300 FourTrax 1988-90
Honda - TRX350D FourTrax Foreman 4x4 1987
Honda - VFR750F 1990-97
Honda - VT1100C Shadow Spirit 1997-01
Honda - VT1100C2 Shadow Sabre 2000-01
Honda - VT1100C3 Shadow Aero 1998-01
Honda - VT1100D2 Shadow American Classic Edition (A.C.E.) 1999
Honda - VT1100T Shadow American Classic Edition (A.C.E.) Tourer 2001
Honda - VT800C Shadow 1988
Honda - VTR250 1989-90

trikes that run the same front axle bearing kit
Honda
110, 125m, 185, 200e, 200es, 200m, 200s, 200x, 250sx, 250es, 250r, 350x
Kawasaki
110, 160, 185, 200a, 200b, 200c, 250a, 250c
kasey200x
10-13-2007, 10:01 PM
go to this site hey have every thing u could need
www.denniskirk.com
Vegas250RR
10-13-2007, 10:06 PM
sorry, I know that parts are still available, but at retail prices... I would like to know what fits and is available through outlets like salvage yards and EMAME. for us bargin hunters that dont want to pay 150+ for a caliper.
FlyingW
10-14-2007, 11:33 PM
Thats a pretty tall order Vegas unless there is some sort of part number cross referance database I don't know about. Having that sort of database would make life WAY easier to determine what parts would work on which bikes. I do imagine that Honda did use some of the same components on the 2 and 4 wheelers as they did on the 3 wheelers. Is there somebody in any sort of position to find out if that's possible?
Stealthduner
10-14-2007, 11:41 PM
Front brakes on the 83-85 200x are the same as the 83-84 atc250r i believe
Vegas250RR
10-14-2007, 11:45 PM
Thats a pretty tall order Vegas unless there is some sort of part number cross referance database I don't know about. Having that sort of database would make life WAY easier to determine what parts would work on which bikes. I do imagine that Honda did use some of the same components on the 2 and 4 wheelers as they did on the 3 wheelers. Is there somebody in any sort of position to find out if that's possible?
maybe, but look where I got with 5 minutes of searching... I think its doable... and bear in mind... I am not talking special things like neck bearings , I am talking electronic components like those that swap in between the Big red and the SX.... and so on
FlyingW
10-14-2007, 11:53 PM
Ya but I'm talking about the ladder of the two. Everything from entire assemblies down to the smallest thing. If it has a part number, which bikes were they used on. Just the other day I needed to pickup a left control for my SX but because it's discontinued I got charged almost full retail cost for new. 60.00 when I could have gotten one for a TRX for about 20.00.
Vegas250RR
10-15-2007, 12:17 AM
speaking of that switch.... THEY ARE DIFFERENT.... I got one and the run and off positions are different.... so now for my SX to run it has to be switched to the off position! ARRRRRRRRRRGHHHHH
FlyingW
10-15-2007, 12:57 AM
That I do know... I bought a TRX switch for my 350 and it's the same way but it still works. I just made some small labels for the switch cover. Plugs do vary through the different models but that's easy to remedy. I chose the TRX switch for my 350 because it did have the start button which I needed for the Goki starter I was installing. I got the new TRX switch off Ebay for 18.00 vs a new 350X switch for 130.00.
jenndnn3
10-15-2007, 12:19 PM
I am not sure I follow this thread exactly but if I am, here is some interchangeable parts..

83-85 200x and 350x grabbar same

86/87 200x,350x, and trx250ex air filter same

bearings, there are alot of interchangeables. Dads has better info on this.

tecate petcock 84/85 = bayou 93-4

83-85 200x engine parts... there is a whole list here as well as electrical.. I will have to go back and research my lost books on that one.

there is an interchangeable hub thread somewhere

shocks there is thread on the various tri-z options as well as tecate.
I have many more... Just dont remember em all..

But your 83-85 200x has the most options...if you ask which parts directly I could probably direct you to best replacement..The only part I never looked into was the axle setup.. But I do know some folks have..
likestrikes
10-15-2007, 06:06 PM
The problem is that these posts come and go. You would need hundreds of "stickys" or a more organized method of posting what fits what with or without modifications.

There are countless parts out there that swap to our machines. Such as the stainless steel timing and flywheel access plugs on one of the newer Hondea quads ( might be 450R - I forget...) that fit an SX and a 350X and use an allen wrench. What about swingarm bolts? They are almost all a 14mm bolt with either a different head size, shoulder size or length. If your ATC has a non existant bolt, I'm certain SOME other new model quad or other will fit as is stock, with a washer or with a cut and re-thread performed to it.

I just went through this at 3WW, unmatching part numbers do not mean that the parts won't fit. They simply mean that a large change or the smallest of changes have been made to that part.

It's a great plan, a great idea but I don't know how to keep it easily organized and accessible.
dads
10-15-2007, 08:27 PM
If you can keep it all in this post. I will copy any known inturchange part and make up a list for tech tips.


like this list of links.

www.3wheeler.org/vb/showthread.php?t=29442


AL
FlyingW
10-15-2007, 09:07 PM
I was afraid the request was huge but I wonder if Honda has any sort of datbase like the one we want. Anybody have any connections with Honda?
likestrikes
10-17-2007, 03:52 PM
Honda still has wacky part numbers. I would hat to abandon a part based on it's number alone.

For instance, I have seen 4 part numbers for 200X brakes, they all fit and have no physical differences....
dads
10-24-2007, 07:52 PM
the 86 350x front caliper uses same pads as the TRX 250r. so the calipers may be the same.
dads
10-24-2007, 07:55 PM
The prob. with brake kits. is calipers may use the same kit but look and hook up diff.
Vegas250RR
10-24-2007, 08:32 PM
the caliper rebuild kit is also the same (listed above).... so one might deduce that you sir are correct... but still check yo stuff!:thumbsup:
dads
12-05-2007, 11:44 PM
Vegas250RR

I added some bearings to your list.