fork exchange???

[johnnygun]

will the suspension front forks from the 83/84 185s/200s fit onto the non-suspension 81/82 185s?
this seems like a no brainer, yes, but thought i'd check.:doh:

still use the same axle and hub system from the 81/82?

[ATCnut]

Yes they will

[johnnygun]

Yes they will

NUT...

is that yes to they fit AND the 82 axle and hub will fit too??

thanks for the quick answer

[dads]

185s and 200s are the same trike. most parts will interchang.
you use the hole front fork setup.

[johnnygun]

thanks man, i'm goin for it.:headbang:

[dads]

www.3wheeler.org/vb/showthread.php?t=31872

[ATCnut]

Dads got back to you before I did. The stuff is all the same, just swap it back and forth as you wish

[johnnygun]

Dads got back to you before I did. The stuff is all the same, just swap it back and forth as you wish

nut--
thanks for the follow-up. all good.:thumbsup:

[johnnygun]

just a note...the front axle/hub/brake from the non-suspended front end will NOT move over to the suspended forks.

[dads]

No you can not just use the wheel assemble... have ti use the howl front end

[johnnygun]

scrat or nut...the link you gave with axle specs looks like a 250r front axle and hub will fit the suspension 200s front forks. this is a much cleaner set-up. (if you are willing to give up front brakes.):confused: or is there an option for that. i would not mind a disc brake in front. what are your thoughts guys????thanks

[dads]

The width of the forks stops that. the S is wider. you would have to make special bushing and hope your axle bolt does not bend.

don't bother.

[johnnygun]

i figured as much-thanks.

already got bid in on a 200s axle etc. on ebay.

[225]

http://i64.photobucket.com/albums/h196/edog_02/100_4440.jpg
http://i64.photobucket.com/albums/h196/edog_02/100_4444.jpg
http://i64.photobucket.com/albums/h196/edog_02/100_4443.jpg