PDA

View Full Version : 250sx Carb



bebeav
10-27-2002, 11:31 AM
which carb will give me more power?? will a 250r carb good or ...???

ALP
Beav

ATCRYDER
10-27-2002, 05:09 PM
Far as I knwo theres no other carb for you to use. Plus--you would lose your handlebar mounted choke elver if you even tried to use anything else. You -cant- use a 250R carb, or a 200x carb. Maybe a 350 carb but the pure fact that youve got the handlebar mounted choke, Id keep the 250sx one.

Rob

ATCnut
10-27-2002, 08:04 PM
I mentioned this in your clutch post.

Trying to get significant performance increases out of a 250sx will end up costing more than a 350x (or other performance machine) and will probably only cause you trouble.

da_catt
10-28-2002, 07:02 PM
a 350x carb is a little bigger. it will fit the 250sx and you can change over the choke. i have a 350x carb for my 250sx but i have to rebuild the carb before i put it on.

ATCRYDER
10-28-2002, 07:05 PM
-can- you change over the choke? I dont think so...without a kit from Kehinn.


Rob

da_catt
10-29-2002, 06:49 PM
from the looks of the two carbs i think it can just be swaped over. i have both carbs and they are just about the same carb except for a few differences. i have not taken eather one apart yet so what is inside i do not know. i did have the carb on the bike, it will fit into the intake manifold and to the air box.

secluded
10-30-2002, 06:56 PM
why not just bore and taper the sx carb?