PDA

View Full Version : Top ATC200X Mods


The otha TRI-Z
11-11-2009, 12:01 AM
While sitting at work today perusing on 3WO I thought to myself I know I have a box in the basement with some magazines that have 3 wheeler articles. Well you guessed it I found them. This article came from September of 1996 out ATV 4 Wheel Action. This was right after they changed their name from 3 & 4 Wheel action. If somebody has already posted this article at one time, my apologise.
ectfor2
11-11-2009, 12:10 AM
Very cool!!! But is there any way you can post it any larger. It's very hard to read.
86waterpumper
11-11-2009, 08:47 AM
lets see if I can help I have the same thing scanned :D

http://instinctz.net/waters/200x/06-87~pg74tuneup.jpg

http://instinctz.net/waters/200x/06-87~pg75tuneup.jpg

http://instinctz.net/waters/200x/9-96~pg40.jpg

http://instinctz.net/waters/200x/9-96~pg42.jpg
ectfor2
11-11-2009, 09:21 AM
Thanks
The otha TRI-Z
11-11-2009, 05:37 PM
Oh yes much better I agree
MagicJames
11-13-2009, 08:14 AM
Is this for 83-85 200x or is it for 86-87 200x?
zwaylo
11-13-2009, 11:19 AM
it's for an 83-85 200x
MagicJames
11-13-2009, 01:29 PM
I thought so, but then saw the pic of the 86-87 200x and just wanted to clarify
BigTBones
11-13-2009, 02:57 PM
I have a magazine article that shows a 83-85 200X upgrade made by Yoshimura. It included the yoshimura exhaust, a fully build topend including a bigger cam, port work im sure etc. bigger piston. Bigger carb etc.

I have never seen one except for the magazine article.

Sparks also made some knarly cams, exhaust combo packages too!
leevarnado
11-27-2009, 08:03 PM
bigtbones,can you post that mag article
Ed200X
04-11-2010, 10:24 AM
Most get the intake wrong when upgrading to a xr200 carb. So be careful!! The correct Honda # is 16210-446-000 for a '80-'84 plain xr200 (not R). Not a 16210-KKO-000 AND NOT A 16210-KTO-000, these are for XR-200R's.
bones200x
04-11-2010, 01:40 PM
Most get the intake wrong when upgrading to a xr200 carb. So be careful!! The correct Honda # is 16210-446-000 for a '80-'84 plain xr200 (not R). Not a 16210-KKO-000 AND NOT A 16210-KTO-000, these are for XR-200R's.

I have a 16210-KT0-000 and 16100-KT0-034 carb off a 87 XR200R on mine. The intake matches carb(26mm). The intake matches up.
Why do you say they are wrong?
bones200x
04-12-2010, 07:12 PM
Hey..just to add this..
Part number 16210-446-000 has been discontinued from Honda.
haywood71
06-14-2010, 02:07 PM
I have the same set-up as Bones but if someone wants (for a fee) a 16210-446-000 intake I have one.

Hey Bones do you remember what your jetting specs were on the X ? slow, main and needle clip position. I changed some things and she is running very rich now. I have 42, 118, middle groove and 1-1/4 turns out on the pilot screw. If I remember you were jetted quite a bit lower.

If I searched long enough I could probably find your post but figure its easier to just ask.