350x fork boot question

[wanta350x]

Seems like allot of people on here know what they are doing......tell me how to replace fork boots on a 350x...looks simple enough. Thanks!::

[Fuzzy]

You have to loosen the clamps. And slide the shocks out of the clamp. And slide the old boots off. And then slide the new ones on and set the shocks back in the clamps and retighten them. It should be a fairly easy task to do.

[hrc200x]

You'll probably need to disconnect the front brake also, either from the handle bar (2 phillips screws), or take the caliper off the fork(I think 2 bolts plus 3 nuts will have to be loosened on the disk to get the caliper past the rim), or take the line off either the caliper or mastercyclinder (1 bolt but you'll need to bleed the front brakes after its done).

What brand of fork boots did you buy?

[ATCRYDER]

I replaced mine with way better oens last night on the 200x

Take the 2 bolts off each clamp....and then slide the forks DOWN (I use took 2 quick wacks with a screwdriver & a hammer JUST to pry the triples open a TID BIT).........Jack it up first & use the jack as a tool. Youll be able to figure otu what to do after that parts over. Takes 10 minutes tops.

Rob