4 stroke blaster?

[fncfmly]

i know its a ^%$# wheeler but i got it last year blew it up 30 min after got it home it wa maxed out mods by preveous owner so i bought a crate motor off ebay had it installed bone stock then said here you go sweety (my 17 yro dughter) she was happyfirst time i let her and her guy take it out with friends it comes back broke less then a month old that was last year i waited to see if they would fix it like they said and.................nope so i riped it open bent crank **** bearings needs a total redo so i say motor swap......any sugestion?....maybe turn it into a trike

[Goat]

You are hereby required to retype that using punctuation. I'll settle for four commas, a few capital letters, and five or six periods.

[fncfmly]

Sorry, I don't type well at all, so to speed things up for me i drop punctuation.


And that's just the way it is!!

[ATC Lover]

He bought a blaster. He thinks it was a cruddy 4 wheeler, it had a 2 stroke motor at first. Turns out after all it was cruddy; he had it blown up in 30 minutes after he got it home. He bought a crate motor for it off of Egay (ebay). He put it in and said; "Here you go sweety" referring to his daughter who is 17 years of age. She was very happy. But one thing happened... She made a HUGE mistake and him as well; They let her boyfriend (assuming that's what he means by GUY FRIEND), ride the cruddy Blaster 2 stroke with a 4 stroke motor in it. Well needless to say, they tore it up. Should he rebuild it, or should he just buy another crummy motor off of EGAY(ebay). Hope that helps!

[NINJA]

that's just the way it is!!



Yeah, Tupac quote! Man, whatever happened to gangsta rap?


But in all seriousness, blasters are cheap to rebuild. Buuuuuut, a modded 200X engine in a blaster would be a great little quad.

[SCUBA]

I would stick with the 2 stroke 200 over the 200x, But it may deoend on where you plan on riding. Are you going to the trails or the dunes?

[fncfmly]

it never had a fourstroke in it . it would be mostly trail ridding but with a dune trip here and there. 200x mod sounds good to me.

[Mr. Richard]

you wanna sell both of those blown up blaster motors????

[fncfmly]

cored the old one. might sell the one i have just depends on how much it will end up costing to install a different motor just dont know wich kind i want

[jenndnn3]

You want to rebuild the original motor..

You want to tell the guy friend get his own @#@#^ quad.

You want to tell "Sweety".. Get out here your hands are getting dirty.. and make her tear it down.. Hand her one philips, one flattip and a metric wrench set. If she is small framed, with little strength, hand her a small cheater bar as well, so she doesnt try useing a hammer.

Welcome to the board!

[TORKER]

I wanted to do this for a while, and even bought a 200 LIFAN for it. But I got a good deal on a 300EX and never got around to put the 4 stroke LIFAN in the Blaster.
IMHO, it would be 1,000 times better with a good, 4 stroke engine in there (I also have four 2 strokes guys, so no bashing). The LIFAN has about the same H.P. as the Blaster engine but with tons of more torque (let's just say that blaster engines are not known for it's torque), is electric start, is cheap and it will fit in the chassis. You will need a battery bracket (it can be easily fabricated on the location of the stock oil bottle). Engine mounts will need to be made and the whole thing re-wired (no biggie, just get the $25 wiring and you'll be all set). 1 more thing, you'll need to change the countershaft sprocket for a 520 chain. Among other things.

Go ahead and do it if you really want to. Everybody will tell you their opinions, some are biased, some are not. Me, I'm just an objective kind of guy. I think it's its a great project. Look at this way, Yamaha realized this and did the same thing, it's called the RAPTOR 250. Why not do it with a blaster???

TORKER.

[ADW3]

You want to rebuild the original motor..

You want to tell the guy friend get his own @#@#^ quad.

You want to tell "Sweety".. Get out here your hands are getting dirty.. and make her tear it down.. Hand her one philips, one flattip and a metric wrench set. If she is small framed, with little strength, hand her a small cheater bar as well, so she doesnt try useing a hammer.

Welcome to the board!That pretty much sums it up right there! :hail: :hail: :hail:

[no_doz]

i know its a ^%$# wheeler but i got it last year blew it up 30 min after got it home it wa maxed out mods by preveous owner so i bought a crate motor off ebay had it installed bone stock then said here you go sweety (my 17 yro dughter) she was happyfirst time i let her and her guy take it out with friends it comes back broke less then a month old that was last year i waited to see if they would fix it like they said and.................nope so i riped it open bent crank **** bearings needs a total redo so i say motor swap......any sugestion?....maybe turn it into a trike

goat was right-if you want people to take the time to read what you right-keep it WAYYYY short or use punctuation (even if it is inserted after the fact).

its a common courtesy to other members, please observe it.

and a blaster trike with an XR200 6 speed motor would be a BEAST

[Escanabajosh]

seen a blaster on CL that had a 350 warrior in it! i asked the kid if he did the swap and what he had to do ( i have a 2001 blaster that sits in the corner was thinking about doing) he said the tank needed to be raised like 1/2" other then that bolted right in!

i only seen a pic so other then that i'm going by what he told me.

[3on3250-R]

This Is the engine I would put In It. YZ250F These little motor's are Mean! They need an oil tank though.

http://i237.photobucket.com/albums/ff42/Jasons450r/YZ250FEngine.jpg

You could add a stock YFZ oil tank like I did on this one.

http://i237.photobucket.com/albums/ff42/Jasons450r/YFZ450-250R.jpg

[NINJA]

That would be more than enough to get the job done. I see plenty of YZ250Fs here. I would be concerned about the poor little chassis holding up to that motor though.
Jason, is that motor in a 250X? I was contemplating doing the same swap.

[3on3250-R]

Ninja It's a YFZ450 In a 88 TRX250R frame. I have really taken a liking to the Yamaha engine's :D
A Blaster with a 250f sounds fun!!! A bit longer swinger, and I think It would be cool.

[fncfmly]

I've Decided To Fix The Original Motor For Now. Till I Find A 4stroke For Low Low Price. I Found Quite A Few Good Ones.cant Spend That Kinda Money Right Now.

[no_doz]

a warriors faulty wiring burned down my uncles house...:doh:

props on the creativity though, just much better engines could have been used for probably less money (250x/300ex/anything xr/anything 2 stroke 125+/cb engines/ninja 250/500 engines, etc...).

[NINJA]

Ninja It's a YFZ450 In a 88 TRX250R frame. I have really taken a liking to the Yamaha engine's :D
A Blaster with a 250f sounds fun!!! A bit longer swinger, and I think It would be cool.That'll teach me for posting drunk, I don't even remember asking that:doh:

But yes, a 250F in a Blaster does sound fun:lmao:

[TORKER]

So, have you decided yet???

TORKER.

[fncfmly]

yeah im fixn the stock motor till i find a good 4stroker at the right price