PDA

View Full Version : bolt pattern ? and top speed?



yamahajake
05-18-2010, 02:56 AM
will wheels off a 200x fit my 350x? and off a 300 ex fit my 350x???? and about what is the top speed of a stock 350x?:dam: thanks guys

jcorkin
05-18-2010, 05:00 AM
rear wheels for the 200x, 350x, and 300ex all have the same bolt pattern 4/110, not sure on the top speed

Barc
05-18-2010, 05:04 AM
According to the sticky at the top of this page they are all 4x110 but;
200X 8x8 rim 4x110
350X 9x9 rim 4x110
300EX 9x9 rim 4x110 front won't work.

You might have a problem putting the 8x8 rim on the 350X, instead of a 9x9 rim.

Top speed? Got GPS? I would guess long flat depending on surface 60-65MPH

yamahajake
05-19-2010, 02:18 AM
thanks guys i did it the hard way already and took the wheel off the 350x and put the 2 other sets of rims on the 200x holes are a hair smaller! but will work

ATCnut
05-21-2010, 08:22 PM
200x wheels hit on the ends of the 350X hubs too.

You have to grind 1/8 inch or so off the outer ends of the hubs/