Ronjon851
01-05-2003, 12:29 PM
I could use some info about the rear caliper set up.85 swingarm,caliper and mount.I put the 85 caliper to the 85 bracket that holds it to the axle and the holes will line up but the rotor does not allow the caliper to drop down to align the bolt holes.The rotor and hub are for a 250r but I am thinking the guy who had the bike before me might have switched the hub/rotor assembly from a 86.The rotor is stock design.Is the 86 rotor a larger diameter than an 85?The only thing from preventing this caliper to align is the caliper adjustment brace that touches the rotor by front clearance cutout for rotor.Has correct pads and hardware.Thanks much,Ron:wtf: