How to Remove Rotor In Engine

[TheR]

My manual says I need a puller to remove this part, but I don't have one, and I want to get this done today. What else can I use for a puller that won't mess anything up?

[hrc200x]

If you have a 200x swing arm bolt it will thread into the hole and pop the fly wheel off.

[sean823]

the puller is a 12 dollar bolt that theads into the flywheel and pushes it off, I'm not sure what size it is though.. Try to find a bolt that with thread, and not strip out the threads in the flywheel...

[TheR]

Originally posted by hrc200x
If you have a 200x swing arm bolt it will thread into the hole and pop the fly wheel off.

So I should go take apart the swing arm and use that bolt?:doh:

[hrc200x]

Yep...if the swing arm bolt will come out, 200x's are kind of known to have the bolt rust to the bushings/bearings inside the swing arm and it won't come out. You might also try the front axle, but I don't know if thats the same or not. If you do get the swing arm bolt out just put a long rod in its place for the time being, then put the bolt back in when your done with it.

[TheR]

I pulled the swing arm bolt right out, no problem. Works like a charm. Thankz Guys

The R