PDA

View Full Version : ATC 70 Carb Re-build Kit Needed



Kev250R
08-05-2003, 07:05 PM
Hey guys, I'm still trying to get the "Swapmeet 70" running and it seems I need a carb. re-build kit (just gaskets). Does anybody know of a place where I can get one?

Thanks,

--Kevin

BIG BAD RED
08-05-2003, 08:30 PM
if your a real cheap *** u can cut one outa an old tube jsut make sure it is realy clean...

jenndnn3
08-05-2003, 10:06 PM
Dont do that you'll have gas comin out your ears. Plus at the price for new gaskets it aint worth it...Also dont silicone the bottom it clogs up the carb. They are too small. Ok Kits are available on ebay, also Dratv has em, and Honda shop should have em. Now for some helpful hints. The atc 90 and 110 earlier years bottom ends of the carb swap with the 70. So that bottom rubber should be the same. I have not tried the actual float bowl itself. Also all the petcocks intechange, so those are the same for filter and rubber there. The top half of the 90 and 110 carb are larger so you wont be able to use those. Anyway if you are needing just one or 2 different rubbers or gaskets you can cheat that way. I know some 110 only sell complete kits while some 70 comes in there own little itty bitty pieces...The newer ones I think. Been awhile, sorry I dont recall off hand....Jen

dave h
08-05-2003, 10:54 PM
thanks jen! i never knew the carb bottoms would swap. in the manual they look the same but never thought of it. dont need it know but its good to know for future :thumbsup: .

yea, id just check ebay, seems to be the cheapest. dennis kurk has them cheaper but by the time you slap on there stupid high shipping, might as well go with internet. but if you have $50 or more from dennis, shippings free, so.....yea....

dave

BIG BAD RED
08-06-2003, 08:35 AM
so buy 50 bux worth or gaskets

jenndnn3
08-06-2003, 09:49 AM
It is only because I have several bottoms and rubber gaskets from my 110 that I discovered that...But I am glad to help....Now BIG BAD RED, you can get the whole complete bottom end of the carb to the atc110 for $45 at a dealer....Thats the bowl, the 2 rubbers, and filter, and I even believe it includes a couple of other goodies...The petcock is expensive but I also believe it is included too...

Kev250R
08-07-2003, 11:33 PM
Thanks for the advice guys! Once again, Jenn I'm in awe of your trike knowledge! :hail:

--Kevin

jenndnn3
08-08-2003, 08:57 AM
Thx Kev, But its not trike knowledge just pure luck that I had the spare parts. I was able to play around with it. one of my 70 bowls has a hole in it I was desperate at the time....:D